Description :  The drills are of the correctional two - flute design with helix angles , flute and point shapes selected for general purpose applications . They may be used very successfully in cast iron , steel forging and other materials

Description :  The drills in these sets are high speed steel , general purpose , straight shank twist drills for portable or machine drilling in metric sizes . Sets are all furnished in polyethylene or steel folding cases .                                                                                                                                      

Description :  These drills are designed for holes required several times deeper than the diameter. In addition to the sizes listed below , there are drills available in other lenghts for the diameters shown .

Description :  These round adjustables dies are used in either hand stock holders or machine holders or machine holders . These dies can be adjusted by turning a small set screw which will change the nominal size of the dies giving them a tight or loose fit to the threads . Most commonly made of carbon steel , but high speed steel threads are also available .   

Description :  The keyless drill chuck is usually used on precision drilling machinery where close

tolerance drilling is essentail . Designed for both toolroom and production machinery where

accuracy , gripping power and keyless features are desired .

Description :  Designed for drilling with Morse taper shanks . The smaller Mores taper number is

for the hole size of the drill insection and the larger  Mores taper number for the outside socket

fitting .

Description :  Body is made of tool steel with a high speed steel tip or a carbide tip . Both types of

 tip ends are properly hardened . The shank is ground to mores tapers and the included angle of

the point is 60 ํ

Description :  Specially designed to withstand high - Speed heavy - duty operations Incorporated

 are a taper roller bearing , thrust ball bearing , ball bearing and other special bearings .

Description :  This S type is recommended for use on precision finishing work with high speed

evolution 

Description :  Used in combination with a lathe or an external grinding machine , the bevel rolling

 center pusher for steel pipe or a workpiece with a large central opening and without a centering

hole . 

Description :  With the screw extractor , the broken both or screw in a threaded hole can be easily

 removed without injuring the threads .

Description :   With the screw extractor , the broken both or screw in a threaded hole can be

easily removed without injuring the threads .

Description :  For turning , boring , threading tool holders .

Description :  Seft centering knuckle or joint has ample bearings to resist the severe strains of

both end and side trust . Two types , A & B are available . Please Specify which type is required

when ordering .

Description :  The jaws are made of tool steel , Carefully hardened and tempered for perfact

performance . The handle is knurled for safe , easy pperation .

Description :  Adjustable round die stocks . Made of steel . Select suitable diameter of stocks to fit

your round dies

Description :  Made of a selected high speed steel or tungsten carbide tipped for cutting smooth

and accurate hole . Available cutting depth is 5 mm for starndard hole saw and 36 mm for deep

cut type hole saw .  

Description :  Made of heat treated steel and can create various hole sizes by single  drill in steel ,

stainless steel , plastic or wood up to 6 mm depth .